14X6.0″ QS WP50031X Gen3 Tile Hub Motor Wheel WP45H 5000W Balance Speed Version

Product Headline
14×6.0inch QS WP50031X Gen3 Tile Winding Hub Motor, WP45H Magnet 5000W Power High Torque E-Motorcycle Wheel Motor for High Voltage E-Bike Modification

Core Product Highlights
Authentic QS Gen3 Tile Winding Technology
Adopts professional tile winding stator design, effectively reducing iron loss and heat generation during high-current operation. Balances high-speed performance and power efficiency, less heat buildup even under long-time full-throttle riding, avoids melting risks caused by overheated thin internal wires.

WP45H Thick Magnet, 5000W Power
45mm height high-performance neodymium magnet delivers massive climbing torque 85 N·m continuous rated torque and 240 N·m peak torque and strong acceleration. Rated 5000W continuous output, peak 12600W burst power, compatible with 48V–96V wide voltage battery systems, perfectly matches your 72V (20S lithium) battery pack with 84V full-charge voltage.

14×6.0inch Wide Aluminum Rim
6.0inch widened alloy wheel rim with polished stainless steel outer trim, supports wide fat tire installation. Thickened wheel hub structure resists impact and deformation, suitable for street riding, off-road trails and rough countryside roads.

Optimized Heat Dissipation Rear Cover
Unique radial wind guide cooling back cover with geometric cutout design, greatly improves airflow heat dissipation to stabilize motor temperature under heavy loads. Laser engraved model code WP50031X and Gen3 Tile identification mark for genuine verification.

Custom Long Extension Cable with Waterproof Connector
Extra long thick gauge power & hall sensor wiring harness with split waterproof plug connector for easy wiring and maintenance. Thicker cable cross-section prevents overheating and melting under high current continuous discharge, specially customized for overseas modified e-bike kits.

Universal Compatibility
Fully compatible with FarDriver, Sabvoton, Sine Wave and other high-current programmable controllers, ideal replacement motor for e-motorcycles, mini e-moped and high-power DIY electric motorcycle projects, widely used by overseas e-bike & e-motorcycle modification shops and individual riders.

Full Technical Specifications
1. Model: QS WP50031X 260 BLDC Hub Motor with Permanent Magnets, 18mm solid thick axle
2. Generation: 3rd Gen Tile Winding Hub Motor Integral Wheel
3. Rim Size: 14×6.0 inch, wide alloy rim
4. Magnet Height: WP45H (45mm neodymium magnet)
5. Rated Power: 5000W
6. Peak Power: 12600W
7. Operating Voltage Range: 48V – 96V DC
8. Compatible Battery: 13S~24S lithium battery
9. Pole Pairs: 16 pairs(32PCS Curved Mangets)
10. Speed: 100km/h (30-140km/h can be customized)
11. Max No-load RPM:1080RPM
12. Max Torque: 240N.M
13. Max Efficiency: 90%
14. Continuous current: 150A
15. Max current:250A ,Peak 350A
16. Brake type: Disc brake
17. Rear Fork width for installation: 205mm (adjustable range: 200–210mm with spacer flanges)
18. Winding Core material: Aluminium
19. Cross Section of Phase wire: 16 mm2 extended thick cable with separate waterproof plug
20. Hall sensor phasing angle: 120 degree
21. Temperature Sensor: Optional
22. Max. Working Temperature: 70 degree, Peak 120 degree
23. Waterproof Grade: IP54
24. N.W. / G.W. : 22kgs / 24kgs
25. Package Size: 55*55*45CM
26. Construction: Tile winding stator, aluminum alloy hub, stainless steel decorative rim
27. Cooling: Radial airflow cooling rear cover
28. Application: High-speed e-motorcycle, DIY off-road ebike, electric moped conversion

Important Safety Notice
This high-power motor requires matched heavy-gauge power cables; undersized thin wires will overheat and melt under continuous high current.
Only use programmable high-current controllers that support 48–96V wide voltage to avoid burnout.
The motor’s long cable must be fixed properly during installation to prevent abrasion and insulation damage.
Not suitable for low-voltage small e-bikes; confirm your battery string count and controller parameters before purchase.

Packing List
14×6.0inch QS WP50031X 260 Gen3 WP45H 5000W Tile Hub Motor wheel with pre-wired extension cable and waterproof connector

Factory After-sales Service
Genuine QS motor core with strict aging test before delivery. Stable power output without voltage surge. OEM private label customization is supported for bulk wholesale orders to modification stores and cross-border sellers. Long-term reliable quality for global e-commerce sales.

Please leave us correct and exactly consignee, phone number and shipping address, so that we can send you the parcel in a right way. Thanks!